hardware

Hardware: 0

Balloon N8173 - Led Zeppelin

N8173

Led Zeppelin
Single burner set in a rectangle black metal frame with fuel lines attached to the burner. The corners of the frame have the shackles for the flying wires.

Omega single burner, 1969

3 gas cylinders in the centre of a circular burner frame with 1 coil burner.

Omega single burner, 1969

Single burner set in a rectangle metal frame with fuel lines attached to the burner. The corners of the frame have the shackles for the flying wires.

Omega single burner, 1970

Balloon OY-BOW(1) - Circus

OY-BOW(1)

Circus
Single coil burner with a solid metal shroud at the base, 2 fixing arms, and a handle to adjust the angle.

Piccard single burner, 1966

Balloon SE-ZYN - Sessan

SE-ZYN

Sessan
At the base is a fan with a deep shroud around it, the single burner sits on top of this. The image includes a frame around the fan for the whole ensemble to sit on.

Single burner and inflation fan combined

A grey metal crown ring with 15 wires connected to it. Most of the wires are looped into individual circles and fastened, to avoid wires becoming entangled in storage.

Small gas balloon load ring

Rectangle wicker basket with both short ends gradually increasing in height. Rim of basket is covered in a padded suede. Foot hole, gaps in the wicker for the tank straps, 4 metal pole holders and 4 flying wires are also visible.

Thunder basket for G-BOSH, 1988

2 coil burners set in a small metal frame which gimbals on a larger frame. Only 1 gas hose is still attached.

Thunder Mark 2 double burner adaptation

2 coil burners set in a small metal rectangle frame with 3 gas hoses.

Thunder Mark 2 double burner adaptation

2 coil burners set in a small metal frame which gimbals on a larger frame. Each burner has two hoses attached.

Thunder Mark 2 double burner, adaptation 

A single burner with 4 gas inlets sat in a black frame which gimbals within a larger black frame. 3 gas hoses are attached including a thinner pilot light hose.

Thunder Mark I single burner, 1973

Wicker basket with 8 flying wires to connect to the balloon. Long sides have 4 rectangles of open wicker work comprising wicker diagonal crosses.

Thunder open weave wicker basket

Wicker basket with 2 rope handles at base of each long side for carrying. The 4 gaps in the wicker are for the gas tank straps to pass through. Rim of the basket has a protective fabric covering. 8 metal flying wires are protruding from the rim.

Thunder wicker basket

The burner comprises a metal cone with a gas ring at the base and the metal coil above the cone.

Tony Patey prototype single burner

Picture of instrument contained in protective polystyrene, beside cardboard packaging and cord wound on a reel.

Vaisala RS80 lightweight radiosonde balloon transmitter

Square wicker basket with 2 wooden toggles on each side for attaching to the load ring. There is a heavy duty khaki fabric sack on one side, with the Omega symbol, which houses the trailrope.

Wartime folding gas balloon wicker basket

A single burner in a black metal frame, no fuel hoses are attached. The corners of the frame have the shackles for the flying wires.

Western single burner, 1973

1 … 10 11 12
0
0
Your Cart
Your cart is emptyReturn to Shop
Continue Shopping
Scroll to Top